HEAR IT Amplified DSP Modules:
The HEAR IT Amplified modules are available in 2 versions. The basic PCB module and a version with an integrated keyboard to provide a simple control interface. More information is given on both modules below.

 

HEAR IT Amplified DSP PCB Module.

The HEAR IT Amplified pcb module is a small versatile solution for adding  noise cancellation into a wide variety of applications.
Connections are on a 0.1” (2.54mm) pitch which allows the module to be easily integrated into almost any system. It incorporates an on board power amplifier to allow it to be easily integrated in to new or existing equipment.

DSP operation can be preset or remotely controlled from the PCB connections.
Small size 37mm x 50mm.

The HEAR IT Amplified -KBD employs the same DSP technology as the basic PCB module. In addition it has an integral microcontroller, connected to a small keyboard assembly.
The microcontroller and keyboard provide single button operation of all the module's functions. The button switches the noise cancellation on/off and changes the DSP noise cancellation level
In addition the unit stores the last used DSP level, so when power is reapplied the unit will default to the last used setting.

Note:
The fitting of the HEAR IT DSP MODULE should only be carried out by a qualified engineer. GAP accepts no responsibility for the fitting or installation of the HEAR IT DSP MODULE and are not liable for any damage to equipment caused by its fitment.