GAP HEAR IT DSP for the FT-817

Features:

4 levels of Noise Cancellation

Single Button Operation

Low power consumption

Low distortion to audio signal

Retain the FT-817's internal Battery pack

Can be used with optional filters

Completely internal fitting - no flying leads

Visual and audible indication of filter level.

2 demonstration modes

HEAR IT DSP MODULE for the Yaesu FT-817.

Now you can have the HEAR IT DSP noise cancellation technology in you FT-817!

White Noise reduction:

Level 1 = 11dB
Level 2 = 13dB
Level 3 = 19dB
Level 4 = 35dB

Tone reduction:

Level 1 = 5dB
Level 2 = 8dB
Level 3 = 21dB
Level 4 = 65dB

Note:
The fitting of the HEAR IT DSP MODULE involves the removal of small surface mount components and the drilling out of the transceivers' lid. This should only be carried out by a qualified engineer. GAP accepts no responsibility for the fitting or installation of the HEAR IT DSP MODULE and are not liable for any damage to equipment caused by its fitment.

GAP Antenna Products, Inc.
99 North Willow St.
Fellsmere, FL 32948
(772) 571-9922Tel.
(772) 571-9988Fax