|

|
|
EAGLE DX
6 Band Multiband DX Antenna
SPECIFICATIONS
- Bands
- With supplied extender, this can be customized to your favorite part
of the band
- Bandwidth -- Under 2:1
- Entire band on 40m 20m 17m 15m 12m
- 10m over 500 KHz
- Height -- 21 ft.
- Weight -- 11 lbs.
- Mount : Virtually anywhere. Supplied pole mount fits your
1.25 in antenna mast
- Counterpoise : 3 rigid counterpoises 80" long
- Ground Area Required : None
- Power-- *300 Watts on 40 Meters - Eagle Only
THE EAGLE DX
The Eagle is the smallest antenna in the GAP product line. Its
development was the result of your requests for a low profile, high
efficiency GAP antenna. The Eagle DX-VI weighs just 11 pounds and can be
installed almost anywhere -- at ground level, on a pole, on your roof or
atop a tower. It is essentially a set of vertical dipoles -- the optimum
singular DX antenna. No traps, coils or transformers are used to achieve
multiband operation in this antenna either. Why is that significant? Traps
are the "weak link in the chain" of a multiband antenna.
Critical to the design of the GAP Eagle was the requirement to permit
operation anywhere on all of its designed frequencies. The Eagle provides
full coverage with a VSWR less than 2:1 on 40m, 20m, 17m, 15m, and 12m and
approximately 500 KHz on 10m without readjusting. 10m operation is further
optimized with a supplied extender. Compare that performance to any other
low profile vertical. With the Eagle, as with all GAP antennas, you will not
need to buy a tuner. If a rare DX station appears on 7.050, but, you
normally work the SSB nets around 7.250, just slide the VFO and key the rig!
If the band is wide open, you might work a LU6 with a coat hanger, but
when conditions are less than perfect you want the highest S meter reading
an antenna can provide. Efficiency is critical. The efficiency of the GAP
Eagle is without equal. It has no traps, transformers or matching coils to
rob transmitted or received power. For the highest S meter, choose a GAP
Eagle.
|